Coating Discoloration

– Insufficient initial coats of finish or seal, or coats applied too thinly. Extremely damaged and / or highly porous flooring (the fact that Ultra Chem Labs coatings penetrate deeper into substrates than conventional floor finish and seals must be utilized especially on certain types of flooring or If floor was damage by extreme mechanical or chemical abuse).
– Scrub and re-coat floor. Use ‘Cleaner & Conditioner’ and apply 3 or more Coats of coatings.
2. Existing floor coating is too worn for conditions.
– Scrub and re-coat floor. Use ‘Cleaner & Conditioner’ and apply 3 or more Coats of coatings.
3. Outside contamination too great.
– Check for outside contamination from your tools, equipment or conventional residuals and / or contaminates from adjoining areas.
4. Strip pad or brush used NOT aggressive enough
– Use ONLY Hi-Pro super-strip type stripping pad or Strato grit brush for flooring with grout. Some operations require both. Test for best results.
5. Semi-permanent seal was used on floor.
– Re-strip and re-coat floor using appropriate procedures
6. Current maintenance program and cleaning frequencies are not sufficient for traffic conditions in this area.
– Re-evaluate floor maintenance program and make necessary adjustments.
7. Improper detailing of edges, corners and/or higher traffic areas at time of initial strip and re-coat
– If practical, spot strip affected areas and re-coat the patched up areas with 3 or more coats the burnish blend the last (third) coat on the edge (s). Add more coatings as necessary.
8. Re-evaluate entrance walk off matting and/or entrance filtering program
– Increase length of walk off mats. Incorporate a strategic, proper Entrance Filter System (walk off mats) which removes soil and moisture more efficiently and effectively.
9. Ultra Chem Labs’ ‘Neutralizer’ not used or wrong dilution used.
– Scrub and re-coat floor. Use ‘Cleaner & Conditioner’ and apply 3 or more Coats of coatings.
– Insufficient initial coats of finish or seal, or coats applied too thinly. Extremely damaged and / or highly porous flooring (the fact that Ultra Chem Labs coatings penetrate deeper into substrates than conventional floor finish and seals must be utilized especially on certain types of flooring or If floor was damage by extreme mechanical or chemical abuse).

Posted in: FAQs

Languages

Please visit our affiliate site in Japanese

Newsletter Sign-up