Damp Mopping

1. Assemble all chemicals and custodial hardware prior to beginning procedures. Read safety instructions on MSDS’s and chemical product labels and comply as directed.
2. Move all moveable objects from area(s) to be damp mopped.
3. Dust Mop floor with an untreated synthetic dust mop to remove loose soil. Use scrapper to remove gum, etc. Dispose of litter.
4. Place Wet Floor Signs at access area(s) to foot traffic.
5. Clean base boards if necessary.
6. Mix ‘Cleaner & Conditioner’ with cold water in a clean bucket with wringer at 1 Oz. per gallon (8ml per liter).
7. Immerse clean, dedicated, daily cleaning wet mop in ‘Cleaner & Conditioner’ solution and wiring out excess moisture.
8. Damp Mop floor framing in edges and filling in center using a figure- pattern.
9. When and as required, re-immerse mop in solution, plunge mop up and down to remove soil from mop. Wring out excess moisture and continue damp mopping using same procedure.
10. Flush out mop and recharge bucket with clean solution as necessary and continue damp mopping procedure.

Posted in: Maintenance

Languages

Please visit our affiliate site in Japanese

Newsletter Sign-up