Fish Eyes – (swirling and circles)

– Dirty, contaminated mops or equipment may have been used
– All mops and tools must be clean, properly set up and free of conventional cleaner residuals.
2. Re-coating performed without proper floor cleaning or preparation
– Re-strip and re-coat floor using appropriate procedures
3. Work area and/or flooring material is too cold.
– Apply all coatings when temperature is above 40°F.
4. Ultra Chem Labs’ ‘Neutralizer’ not used or wrong dilution used.
– Scrub and re-coat floor. Use ‘Cleaner & Conditioner’ and apply 3 or more Coats of coatings.
– Insufficient initial coats of finish or seal, or coats applied too thinly. Extremely damaged and / or highly porous flooring (the fact that Ultra Chem Labs coatings penetrate deeper into substrates than conventional floor finish and seals must be utilized especially on certain types of flooring or If floor was damage by extreme mechanical or chemical abuse).

Posted in: FAQs

Languages

Please visit our affiliate site in Japanese

Newsletter Sign-up