Restoration – Wet Mopping

1. Assemble all chemicals and custodial hardware prior to beginning procedures. Read safety instructions on MSDS and chemical product labels and comply as directed
2. Move all moveable objects from area(s) to be wet mopped.
3. Dust Mop floor with synthetic untreated dust mop to remove loose soil. Use scrapper to remove gum, etc. Dispose of litter.
4. Place Wet Floor Signs at access area(s) to foot traffic.
5. Clean base boards if necessary.
6. Mix Cleaner & Conditioner with cold water in a clean bucket with wringer at 1oz. Per gallon (8ml per liter).
7. Immerse clean, dedicated, daily cleaning wet mop in ‘Cleaner & Conditioner’ solution and press mop lightly in wringer to remove dripping.
8. Floor cleaning solution on to a manageable area of the floor framing in edges and filling in center using figure-8 pattern.
9. Wring out cleaning mop thoroughly and pick up cleaning solution previously applied. Remove any abrasions lack marks from floor, while making final pick up, with an abrasive pad attached to the mop handle or by dragging abrasive pad under one’s foot.
10. Flush out mop and recharge bucket with clean solution as necessary and continue wet mopping procedure.

Alternate Procedure Options
Note: For heavy-duty wet mopping, the dilution of ‘Cleaner & Conditioner’ may be increased 2oz. per gallon (16ml per liter).

Posted in: Maintenance

Languages

Please visit our affiliate site in Japanese

Newsletter Sign-up